1" X 1" X 96" X 16 Gauge Stainless Steel Corner Guard in a #4 Brushed Finish

BIG  SAVINGS ON SHIPPING 92'' CORNER GUARDS IF YOU CAN USE INSTEAD OF 96"

 This is our most substantial yet economical Stainless Steel Wall Guard for your project. The Heavy Duty 1" x 1" x 96" 16-gauge type 304 Stainless Steel Corner Guard is Heavy Duty and of the highest quality, made exclusively in our Beltsville Maryland Factory, USA. It withstands impact and will last for years. This best seller adds width, adding an extra wide stainless-steel trim around the wall corner. Our 16-gauge Type 304 Stainless Steel Corner Guard is Heavy Duty crafted of the highest quality materials and made in our Beltsville Maryland, USA Factory. Able to withstand impact and will last for years. The #4 Brushed Satin Stainless finish provides excellent protection and easy maintenance. It is available formed in 90 degree or 135-degree angles.  

We Offer Three Basic Options:

1) Holes for screw mounting require a #8 pan head screw (supplied separately for an additional cost).  Counter Sunk holes option includes #8 Flathead stainless steel screws.

2) Wing Option material is bent again 3/8" inward at the ends of each corner guard leg. This option provides a more finished look, prevents rocking and helps the corner guard to hug an out of square wall.

3) Tape Mount Factory attached 3M™ peel & stick Double-sided bonding tape.  (Wings option is highly recommended when mounting with Two-Sided Tape).

Select an Option and the corner guard product image will change and visually display the option you selected. 

Options:

Our stock Corner Guard is bent at a 90° angle of #4 brushed stainless and is available with the following options:

Select an Option and the corner guard product image will change and visually display the option you selected;

• Plain Holes for screw mounting, requires #8 pan head or round head screws (not included)
• Countersunk Holes with Screws, #8 x 1 1/4" Stainless Steel Flat head screws are included (2 holes per side)
• Factory applied specially formulated industrial strength Two-Sided Tape
• 3/8" Tapered Wings to hug your wall
• 90° & 135° angle (custom angles are available at your request)

Hole Spacing: 96” has 5 holes on each leg, 1 hole 3” in from each end and 3 additional holes equally spaced, 3/8” in from edge. (1/2” from edge if tapered wings are required)

Protect Your Walls with Stainless Steel Corner Guards

Stainless steel corner guards offer a visually appealing solution to shield wall corners from damage caused by everyday traffic. Unlike traditional materials like plastic or wood, stainless steel provides superior durability, and corrosion while maintaining its sleek appearance. Available in various finishes, these guards cater to different aesthetic preferences and functional needs. Stainless steel is particularly advantageous in high-moisture or high-traffic areas, ensuring long-lasting protection. With their economical pricing and easy installation, stainless steel corner guards are the smart choice for homeowners, businesses, and contractors looking to protect their spaces. For more information, please contact us today!

16 gauge stainless steel is typically made from T304 stainless steel, containing 20% chromium and 10% nickel, offering high durability and resistance to rust, dents, and scratches. 304 stainless steel is often considered more resistant than many other types of steel, including some leading carbon steels and lower-grade stainless steels, for several reasons:

1. Corrosion Resistance: 304 stainless steel contains a higher percentage of chromium (typically 18%) and nickel (around 8%). This combination enhances its resistance to corrosion, especially in environments that may expose it to moisture or corrosive substances.
2. Durability: 304 stainless steel is known for its toughness and ability to withstand impacts, making it less prone to cracking or breaking compared to other steel types.
3. Temperature Tolerance: It can handle a wide range of temperatures without losing its structural integrity, making it suitable for both hot and cold applications.
4. Chemical Resistance: 304 stainless steel is resistant to a variety of chemicals, including organic and inorganic compounds, which can degrade other metals.
5. Non-reactive Surface: This type of stainless steel has a non-reactive surface, which means it won’t interact with food or other materials, making it ideal for food processing and kitchen environments.